Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Overall | |
---|---|
Maximum Effective Signal Range | Agriculture Spraying Altitude (3 to 6m): 3 to 6km |
Rural Area Flight Altitude (120m), Few Obstruction & Medium Interference: 10 to 15km | |
Above Sea Flight Altitude (150m), No Obstruction & Low Interference: 30~40km | |
Working Frequency | UniRC 7 Pro: 2.400GHz - 2.476GHz, 5.725GHz - 5.829GHz |
UniRC7: 2.400GHz - 2.476GHz | |
Physical Channels | 10 x Custom Buttons |
6 x Flight Mode Buttons | |
2 x Main Joysticks | |
1 x Sub Joysticks | |
2 x Dials | |
2 x 3-Stage Switches | |
Ground Unit | |
Monitor | 7-inch 1080P 1600-nit High Definition and High Brightness LCD Touchscreen UniRC7 Pro: 1920x1200 UniRC7: 1280x800 |
Operating System | Android 13 |
Android Hardware | 4GB RAM + 64GB ROM |
Wi-Fi | Wi-Fi 5 |
Bluetooth | BT 5.0 |
GNSS | GPS/GLONASS/BeiDou/Galileo/QZSS |
Battery Life | UniRC 7 Pro: Approx 8 hours UniRC 7: Approx 11 hours |
Battery Capacity | 13400mAh |
Charging Protocol | PD 30W |
Charging Time | Approx. 4.5 hours |
Datalink/SDK Port | UART/UDP, Bluetooth, Type-C |
Interfaces | UniRC 7 Pro: External Device (Mouse, USB Disk, USB Microphone) USB-A Serial Port (for RTK Dotting Module): USB-A File Transfer: USB-A Video Output: Standard HDMI Network Communication: LAN (GH1.25 4-Pin) UniRC 7: Serial Port (for RTK Dotting Module): USB-A Charging: Type-C Firmware Upgrade: Type-C File Transfer: Type-C Mobile Network: SIM Card Slot External Storage: TF Card Slot / USB-A Tripod Mount: 1/4-inch Standard Screw Hole |
Antennas | UniRC 7 Pro: 2 x Internal (5GHz) + 2 x External (2.4GHz) UniRC 7: 2 x External (2.4GHz) |
Protection Class | IP54 |
Dimentsions | L274 x W190 x H100mm |
Weight | UniRC 7 Pro: 1.46kg UniRC 7: 1.44kg |
Air Unit | |
RC Signal Output | 16-Channel S.Bus 5-Channel PWM |
Interfaces | RC Signal Output: S.bus (GH1.25 2-Pin) RC Signal Output: PWM 1 to 5 (GH1.25 6-Pin) Datalink: 2 x UART (GH1.25 3-Pin) Video & Data: 2 x LAN (GH1.25 8-Pin) Power Supply: XT30 Firmware Upgrade: Type-C |
Antennas | UniRC 7 Pro: 2 x Quick-Release MMCX (5 GHz) 2 x Detachable IPEX (2.4 GHz) UniRC 7: 2 x Detachable IPEX (2.4 GHz) |
Working Voltage | 7 to 76V |
Dimensions (antenna excluded) | UniRC 7 Pro: L63 x W40 x H27mm UniRC 7: L57 x W40 x H28mm |
Weight (antenna excluded) | UniRC 7 Pro: 115g UniRC 7: 90g |
Average Power Consumption | UniRC 7 Pro: 8W UniRC 7: 6W |
There are no reviews yet. Be the first one to write one.